Blog - www.routerlogin.net

Resetting the Netgear router | routerlogin.net

Netgear web domain routerlogin.net  WPS connection

Netgear is proudly standing on the top rank among the other networking device manufacturers. This is because Netgear is always up for any new challenge that its users face. Previously the users had to face a lot of trouble while accessing their router’s setup page through the default IP address of the router 192.168.1.1 or 192.168.0.1. This default IP address was naturally a bit complex due to its numerical structure and it was getting quite tough for the users to get into their router admin page through this method. The WPS mode of connection is quite useful method of connecting the router to the computer device.

Importance of routerlogin.net

Then came the Netgear’s helping hand towards its users in the form of a user-friendly customized web domain www.routerlogin.net, this web address changed completely the way of in which the users have been accessing their router.

This new web domain is more easy and convenient to remember as that the default IP address. However, it is also very important here to note that you can always have the access of getting into the router through its default IP address. For most, the Netgear routers, the default login IP address is 192.168.1.1 or 192.168.0.1

WPS connection for the Netgear router setup

The WPS connection is the least used method while setting up the router or modem. The WPS mode of connection has been ignored by the majority of the technology users only due to the lack of knowledge. But today we will definitely try to bring this method of connection to a limelight.

WPS mode of connection is the most convenient and faster way of getting your router connected to the computer machined instantly.

  • Just switch on the router/modem and open the computer’s wireless section and click on the WPS button, it will start the wireless signal reception.
  • Now press the WPS button on the router and your router will get connected to your computer/laptop instantly.
  • You can confirm the connection either by seeing the list of connected networks or the WPS LED on the router’s indicator panel.

Limitations of the WPS mode of connection

This method cannot be used with the wireless networks that don’t support the latest security keys like WPA/WPA2 or WPSK keys. The wireless routers with outdated security keys cannot be connected to the computer system through WPS done.

Netgear router setup after WPS connection

Now that your router has been connected to your computer device successfully, what you need to do is configure the router accordingly for internet and network data transmission.
Follow the steps mentioned below in order to complete the configuration within no time.

  • Open the browser and access the router’s admin dashboard page through http://routerlogin.net or through its default IP address whichever you are comfortable with.
  • Authorize your access to the router setup page with a default username and the password which is “admin” and “password” respectively.
  • Select the proper connection type under the Internet and WAN settings tab. Fill in the required information provided by your service provider.
  • Follow rest of the instructions on the screen and click the save and apply changes Then click the reboot now tab.

All the new configuration settings will be written on the router and your router will be ready to serve you with the blazing fast speed of the internet and network data transmission.

Resetting the Netgear router

The Netgear routers are although quite efficient networking devices but still, sometimes the best machines also tend to malfunction due to several reasons. The reason can be anything related to the improper usage or the wear and tear of the router.

The Netgear routers can be reset through one of the below-mentioned methods.

  • Reset through the factory reset button
  • Reset through firmware (routerlogin.net)

Reset through the reset button

If you want to get your router reset within no time, just go with this method. What you will need to do is just insert a pinpointed object like a paper pin or paper clip deep into the pinhole of the router where the reset button is located. The reset button is placed deep inside the hole to prevent its misuse or unnecessary frequent usage.

You will have to keep the reset button pushed for at least 5 seconds until the router gets a reboot and you can see the ongoing process through the LEDs on the front panel. The LEDs will go off and on indicating a router reboot.

Key facts to note about Netgear router reset

  1. Always use the wired Ethernet connection when performing the router reset.
  2. Also, try to connect all the hardware devices to a backed up power source which don’t fluctuate or goes off during the ongoing operations.
  3. Moreover, it is advisable not to reset the router unnecessarily and once the router is reset back to its original factory settings, all of its data will be erased and you will need to configure it again with the new values.

Does the firmware of the router get back to its previous or factory version when we perform a reset?

In most of the cases, when the router is reset to its original factory settings, the firmware of the router gets back to the factory version and the user needs to update the firmware all again after configuring the router. You can also update the firmware of the router before configuring it.

It is also to be noted that in some cases, the users have seen no change in their router’s firmware version, only the settings, and other information was erased from the router. But this could be the case with the highest tech routers only.

setup and login to the Nighthawk AD7200 Model | routerlogin.net

Netgear routers are well known for their reliability and outstanding performance in terms of user interface, overall speed, latest technology, advanced features and more. The user can personalize their network using the advanced features so that the user can create a network that is most suitable to their needs. The user can login using www.routerlogin.net and gain access to the Netgear Genie to configure their network most suitable to their needs. The login process is very simple and it only takes a few minutes of the user’s time.

Once the user has successfully logged in to their network, the user must take some recommended steps to further secure their network. The user must change the username and password for their router in order to prevent any unauthorized users from accessing the user’s network without their permission. The user must also update the firmware of their Netgear router. The firmware is one of the most crucial parts of the router. The firmware is responsible for the functions undertaken within the router and all the hardware as well. All the sensitive information of the user passes through the router such as the private information of the user, their emails and passwords, their banking information when they buy something online and more. The firmware update also updates the security on the router so that the router and all the information passing through the router is not vulnerable to any potential threats. The firmware update also adds some new features and bug fixes to the router so that the user can keep using their router without any problems. The new firmware might even add some new features to the router.

Here, we will provide the step by step process to configure the router so that the user can create a secure and personalized network without any problems.

Here are the troubleshooting steps to setup and login to the Nighthawk AD7200 Model R9000 X10 Smart Wi-Fi Router:

  • Connect the Ethernet cable from the modem to the WAN port located at the back of the Netgear router.
  • Now, connect another Ethernet cable from the desktop computer or laptop to any of the four internet ports of the router.
  • Reboot the router, the device and the modem. Wait for them to finish rebooting.
http://netgearl92l68ll.com/
  • Open any internet browser on the same device and type www.routerlogin.net in the address bar. Press enter.
  • The router’s admin login page will appear. There, the user will be required to enter the default username and password for the router.
  • The default username is “admin” and the default password is “password” for most of the Netgear routers. The username and password are case sensitive.
  • Once the user has successfully logged in to the router, the Setup Wizard will appear.
  • The Setup Wizard will try to detect the type of internet connection that the user has. For all the wired connections, the Setup Wizard detects it as Dynamic IP.
  • Once the Setup Wizard has detected the type of internet connection, the router will have setup and logged in successfully.

From here, the user can further configure their network to implement better security on the router.

Here are the troubleshooting steps to reset the Nighthawk AD7200 Model R9000 X10 Smart Wi-Fi Router:

  • Locate the reset button at the back of the router. It will be placed inside a very small hole to prevent accidental reset.
  • Using a pin or something similar, press and hold the reset button for about ten seconds.
  • Release the button after ten seconds. The router will have been restored back to its factory default settings.

Once the router has been reset, all the personalized settings of the router will also get reset. The process cannot be reversed after the reset has been done.

Here are the troubleshooting steps to update the firmware of the Nighthawk AD7200 Model R9000 X10 Smart Wi-Fi Router:

  • Download the latest firmware file from the NETGEAR Download Centre and save it to the desired location.
  • Open any internet browser on the same device and type www.routerlogin.net in the address bar. Press enter.
  • The admin login page for the Netgear router will appear. There, the user will be asked to enter the default username and password for the router.
  • Enter the default credentials regarding the router. The Netgear Genie will appear.
  • Click the Administration tab under the ADVANCED option.
  • There, the user will see the Firmware update or Router update option. The name may vary for different router models.
  • Click the Browse button to locate the previously downloaded file.
  • Click upload to begin the update process.
  • Once the router has finished updating the firmware, the router will reboot itself.

Once the router has finished updating the firmware, the user can start using their router as they desire.

Take Note:

  • Do not download the firmware file from any third party websites as it may contain some malicious content and may even render the router useless.
  • Do not unplug the router from its power source as it can damage the firmware of the router.
  • Make sure that the downloaded firmware is the latest version.

Here are the troubleshooting steps to change the username and password for the Nighthawk AD7200 Model R9000 X10 Smart Wi-Fi Router:

  • Open any web browser and type www.routerlogin.net in the address bar. Hit the enter key.
  • The admin login window will appear for the Netgear router. There, the user will be prompted to enter the default information regarding the router.
  • Once the user has successfully logged into the router, the web based interface will appear.
  • There, click the Wireless option from the justify side of the screen.
  • The user will see a Network Name (SSID) option. There, the user can enter the new desired username for their router.
  • Underneath the Network Name, the user will see the Network Key (passphrase) option. Here, the user can enter the new desired password for their router.
  • Make sure that the user saves the changes made to implement the changes.

Once the user has successfully changed the username and password for the router, the user can reconnect their devices to the router using the new username and password.

Take Note:

  • Do not enter any password hints within the username or share any sensitive information within the username as the username is still visible to nearby devices.
  • Make sure to keep a strong password so that it is very hard for people to guess.
  • Do not share the password with everyone.